Mini Excavator Grading / Clean-up Bucket for 1–6T
The mini excavator grading bucket is designed for grading, site clean-up, ditch finishing, slope work and slope maintenance that require smoother passes rather than deep digging.
- Home
- / Products
- / Mini Excavator Grading Clean-up Bucket for 1–6T
Product Overview
Built for Grading, Finishing, and Clean-Up Work
This grading / clean-up bucket is ideal for grading and clean-up jobs that require a smoother pass and flatter finish, including trimming, backfill, surface clean-up, and ditch finishing. A wider bucket face leaves less edge marking than a narrow digging bucket, especially on trimming, backfill, and surface clean-up work.
Bucket Uses
Common Uses of the Mini Grading / Clean-up Bucket
Use this bucket after the initial cut, during backfill, or when shaping surfaces rather than digging deeper. Its wide face provides a cleaner passage across loose soil, slopes and site edges.
Site Clean-up
Clears loose spoil and leaves the work area cleaner after heavier bucket work is done.
Slope Work
Used on sloped sections where a narrow digging bucket would leave more ridges.
Final Surface Pass
Used to make last-minute corrections before handover or backfill.
Ditch Finishing
After the main cut is done, this bucket helps with ditch cleaning and cleaning up the ditch line.
Surface Grading
Works well for surface grading and leveling where a wider bucket face is better suited to the surface.
Bucket Fit & Working Range
Bucket fit depends on your machine, the grading result you need, and the width of the working pass.
Machine range
Compare the size of your mini excavator and the attachments you already have.
Bucket Profile
Ideal for work requiring a larger face on the ground, such as grading and clean-up passes.
Job & Machine Fit
The machine in use and the expected finish are both taken into consideration.
What To Check
Machine details, bucket photos, and a short note on the finish work are usually more useful than a long description.
Machine Model
Bucket fit starts with the machine brand, model, and operating weight.
Pin & Linkage
Check the current setup for pin size, pin centres, and arm width or arm length where needed.
Finish Requirement
Finish quality, grading direction, and surface condition all affect bucket choice.
Photos or Drawings
Existing bucket photos, dimensions, or drawings help make the next review step clearer.
Used in Package
Grading & Clean-up Attachment Package
For 2–5T mini excavators that need grading, backfilling, ditch cleaning, surface finishing, and compact site clean-up after fitment review.
Our Products
Related Products
Mini Trenching Buckets for 1–6T
A narrower bucket for trenching, cable runs, drainage, and other work that needs a smaller width.
Excavator Mechanical Quick Coupler
For changing between buckets where machine fitment, pin setup, and linkage details are confirmed.
Excavator Bucket Wear Parts
When bucket edges or other wear parts are worn, they can be replaced, matched, and supplied again.
Product Inquiry
Need A Better Fit For Grading And Clean-up Work?
Send the machine model, operating weight, and photos of the current setup if you already have them. In many cases, that is enough to check the bucket fit.